JLD AC Surge protection device series(SPD)

Name: JLD AC Surge protection device series(SPD)
Availability: InStock

JLD Series T2 surge protective device is suitable for power distribution and controlling system under the circuit of AC50Hz/60Hz, rated voltage 230/400V. It is used to protect all of the electrical equipment in the power system from lightning and against transient over voltage, release surge power to the ground so that protect circuits and equipment. In compliance with IEC/EN61643‑11.

Online Inquiry Whatsapp

Application

JLD Series T2 surge protective device is suitable for power distribution and controlling system under the circuit of AC50Hz/60Hz, rated voltage 230/400V. It is used to protect all of the electrical equipment in the power system from lightning and against transient over voltage, release surge power to the ground so that protect circuits and equipment. In compliance with IEC/EN61643‑11.

Status indicator
Low residual, short response time
Thermal disconnect device.
Core components are strictly screened, stable performance and reliable operation.
Using the latest arc extinguishing technology to avoid fire completely
Module is designed and installed conveniently and can be replaced directly.

Technical Data

Model	JLD‑40	JLD‑80	JLD‑120
Nominal voltage Un(VAC.)	385V
Max.continuous operating voltage Uc(VAC)	385V
Nominal discharge current ln(8/20μs)	20KA	40KA	60KA
Max.discharge current lmax(8/20μs)	40KA	80KA	120KA
Voltage protection level Up	≤1.8kV	≤2.4kV	≤2.5kV
SPD Type	T2
AC system	TN
Pole	1P, 2P, 3P, 4P
Protection mode(s)	L/PE
Technology	MOV(Metal Oxide Varistors)
Plugable	Yes
Mounting	35mm DIN rail
Housing material	PA66(nylon),flame retardant
Operating temperature	-40℃ to 70℃
Pemissible operating humidity	5%...95%
Altitude	≤3000m
Protection rating	IP20(built‑in)
Operating state/fault indication	Green/Red
Remote Signaling	Optional
Standdards compliance	IEC 61643‑11/EN 61643‑11